Machine-learning-enhanced variable-angle truss model to predict the shear capacity of RC elements with transverse reinforcement

Created by W.Langdon from gp-bibliography.bib Revision:1.8051

@Article{DEDOMENICO:2023:prostr,

• author = "Dario {De Domenico} and Giuseppe Quaranta and Qingcong Zeng and Giorgio Monti",
• title = "Machine-learning-enhanced variable-angle truss model to predict the shear capacity of {RC} elements with transverse reinforcement",
• journal = "Procedia Structural Integrity",
• volume = "44",
• pages = "1688--1695",
• year = "2023",
• note = "XIX ANIDIS Conference, Seismic Engineering in Italy",
• keywords = "genetic algorithms, genetic programming, Reinforced concrete beams, Reinforced concrete columns, Design code, Machine learning, Reinforced concrete, Shear capacity, Variable-angle truss model, Eurocode",
• ISSN = "2452-3216",
• URL = "https://www.sciencedirect.com/science/article/pii/S245232162300224X",
• DOI = "doi:10.1016/j.prostr.2023.01.216",
• abstract = "This contribution presents a numerical model for the shear capacity prediction of reinforced concrete (RC) elements with transverse reinforcement. The proposed model originates from one of the most popular mechanical models adopted in building codes, namely the variable-angle truss model. Starting from the formulation proposed in the Eurocode 2, two empirical coefficients governing the concrete contribution (i.e., the shear capacity ascribed to crushing of compressed struts) are adjusted and enriched through machine learning, in such a way to improve the predictive efficiency of the model against experimental results. More specifically, genetic programming is used to derive closed-form expressions of the two corrective coefficients, thus facilitating the use of this model for practical purposes. The proposed expressions are validated by comparison with a wide set of experimental results collected from the literature concerning RC beams and columns failing in shear under both monotonic and cyclic loading conditions, respectively. It is demonstrated that the proposed formulation, thanks to the two novel corrective coefficients, not only attains higher accuracy than the original Eurocode 2 formulation, but also outperforms many other existing design code provisions while preserving a sound mechanical basis",

}

Genetic Programming entries for Dario De Domenico Giuseppe Quaranta Qingcong Zeng Giorgio Monti

Citations