Genetic Programming Bibliography entries for Miran Brezocnik
up to index
Created by W.Langdon from
gp-bibliography.bib Revision:1.7954
GP coauthors/coeditors:
Joze Balic,
Franci Cus,
Leo Gusel,
Zlatko Kampus,
Miha Kovacic,
Karl Kuzman,
Zmago Brezocnik,
Mirko Ficko,
Bogdan Sovilj,
Bostjan Vaupotic,
Janez Fridrih,
Ivo Pahole,
Matej Psenicnik,
Uros Zuperl,
Polona Dobnik Dubrovski,
Igor Drstvensek,
Borut Kecelj,
Radomir Turk,
Peter Uratnik,
Borut Leser,
M Podbregar,
A Podbregar-Mars,
Maja Cevnik,
Olivera Sauperl,
Janez Zerovnik,
Petra Zohara,
Genetic Programming Articles by Miran Brezocnik
-
Miha Kovacic and Uros Zuperl and Leo Gusel and Miran Brezocnik.
Reduction of surface defects by optimization of casting speed using genetic programming: An industrial case study.
Advances in Production Engineering \& Management, 18(4):501-511, 2023.
details
-
M. Kovacic and U. Zuperl and M. Brezocnik.
Optimization of the rhomboidity of continuously cast billets using linear regression and genetic programming: A real industrial study.
Advances in Production Engineering \& Management, 17(4):469-478, 2022.
details
-
Miran Brezocnik and Uros Zuperl.
Optimization of the Continuous Casting Process of Hypoeutectoid Steel Grades Using Multiple Linear Regression and Genetic Programming--An Industrial Study.
Metals, 11(6) 2021.
details
-
Miha Kovacic and Borut Leser and Miran Brezocnik.
Modelling and optimization of sulfur addition during 70MnVS4 steelmaking: An industrial case study.
Advances in Production Engineering \& Management, 16(2):253-261, 2021.
details
-
Miha Kovacic and Miran Brezocnik.
Reduction of Surface Defects and Optimization of Continuous Casting of 70MnVS4 Steel.
The International Journal of Simulation Modelling, 17(4):667-676, 2018.
details
-
Maja Rotovnik and Miran Brezocnik and Olivera Sauperl and Janez Zerovnik.
On the models of cross-linking efficiency of cotton cellulose obtained by genetic programming.
International Journal of Chemical Modeling, 3(3):Article 12, 2011.
details
-
Leo Gusel and Miran Brezocnik.
Application of genetic programming for modelling of material characteristics.
Expert Systems with Applications, 38(12):15014-15019, 2011.
details
-
Miha Kovacic and Peter Uratnik and Miran Brezocnik and Radomir Turk.
Prediction of the Bending Capability of Rolled Metal Sheet by Genetic Programming.
Materials and Manufacturing Processes, 22(5):634-640, 2007.
details
-
Olivera Sauperl and Miran Brezocnik.
Study of crosslinking efficiency of cotton cellulose by different physical-chemical methods and genetic programming.
Materials research innovations, 10(1):45-62, 2006.
details
-
Leo Gusel and Miran Brezocnik.
Modeling of impact toughness of cold formed material by genetic programming.
Computational Materials Science, 37(4):476-482, 2006.
details
-
Miran Brezocnik and Miha Kovacic and Matej Psenicnik.
Prediction of steel machinability by genetic programming.
Journal of achievements in materials and manufacturing engineering, 16(1-2):107-113, 2006.
Special Issue of CAM3S'2005.
details
-
Miha Kovacic and Miran Brezocnik and Radomir Turk.
Modeling of Hot Yield Stress Curves for Carbon Silicon Steel by Genetic Programming.
Materials and Manufacturing Processes, 20(3):543-551, 2005.
details
-
Miha Kovacic and Miran Brezocnik and Ivo Pahole and Joze Balic and Borut Kecelj.
Evolutionary programming of CNC machines.
Journal of Materials Processing Technology, 164-165:1379-1387, 2005.
details
-
Miran Brezocnik and Miha Kovacic and Leo Gusel.
Comparison Between Genetic Algorithm and Genetic Programming Approach for Modeling the Stress Distribution.
Materials and Manufacturing Processes, 20(3):497-508, 2005.
details
-
Petra Zohara and Miha Kovacic and Miran Brezocnik and Matej Podbregar.
Prediction of maintenance of sinus rhythm after electrical cardioversion of atrial fibrillation by non-deterministic modelling.
Europace, 7(5):500-507, 2005.
details
-
Leo Gusel and Miran Brezocnik.
Genetic modeling of electrical conductivity of formed material.
Materials and technology, 39(4):107-111, 2005.
details
-
M. Ficko and I. Drstvensek and M. Brezocnik and J. Balic and B. Vaupotic.
Prediction of total manufacturing costs for stamping tool on the basis of CAD-model of finished product.
Journal of Materials Processing Technology, 164-165:1327-1335, 2005.
details
-
Mirko Ficko and Miran Brezocnik and Joze Balic.
Designing the layout of single- and multiple-rows flexible manufacturing system by genetic algorithms.
Journal of Materials Processing Technology, 157-158:150-158, 2004.
details
-
Miran Brezocnik and Miha Kovacic and Joze Balic and Bogdan Sovilj.
Programming CNC measuring machines by genetic algorithms.
Academic Journal of Manufacturing Engineering, 2(4):15-20, 2004.
details
-
M. Kovacic and J. Balic and M. Brezocnik.
Evolutionary approach for cutting forces prediction in milling.
Journal of Materials Processing Technology, 155-156:1647-1652, 2004.
details
-
Mirko Ficko and Miha Kovacic and Miran Brezocnik.
Genetic algorithms : a useful optimization method for manufacturing problems.
Academic Journal of Manufacturing Engineering, 2(1):21-26, 2004.
details
-
M. Brezocnik and M. Kovacic and M. Ficko.
Prediction of surface roughness with genetic programming.
Journal of Materials Processing Technology, 157-158:28-36, 2004.
details
-
Miran Brezocnik and Leo Gusel.
Predicting stress distribution in cold-formed material with genetic programming.
International journal of advanced manufacturing technology, 23(7-8):467-474, 2004.
details
-
Miran Brezocnik and Miha Kovacic and Mirko Ficko.
Intelligent systems for next-generation manufacturing.
Academic Journal of Manufacturing Engineering, 2(1):34-37, 2004.
details
-
M. Podbregar and M. Kovacic and A. Podbregar-Mars and M. Brezocnik.
Predicting defibrillation success by 'genetic' programming in patients with out-of-hospital cardiac arrest.
Resuscitation, 57(2):153-159, 2003.
details
-
Miha Kovacic and Miran Brezocnik.
Genetic programming approach for surface quality prediction.
Tehnicki vjesnik, 10(1):19-24, 2003.
details
-
Miran Brezocnik and Joze Balic and Zmago Brezocnik.
Emergence of intelligence in next-generation manufacturing systems.
Robotics and Computer-Integrated Manufacturing, 19(1-2):55-63, 2003.
details
-
Miran Brezocnik and Miha Kovacic.
Integrated genetic programming and genetic algorithm approach to predict surface roughness.
Materials and Manufacturing Processes, 18(3):475-491, 2003.
details
-
Polona Dobnik Dubrovski and Miran Brezocnik.
Using genetic programming to predict the macroporosity of woven cotton fabrics.
Textile research journal, 72(3):187-194, 2002.
details
-
Miran Brezocnik and Joze Balic and Karl Kuzman.
Genetic programming approach to determining of metal materials properties.
Journal of Intelligent Manufacturing, 13(1):5-17, 2002.
details
-
Miran Brezocnik and Joze Balic.
A genetic-based approach to simulation of self-organizing assembly.
Robotics and Computer-Integrated Manufacturing, 17(1-2):113-120, 2001.
details
-
Miran Brezocnik and Joze Balic and Zlatko Kampus.
Modeling of forming efficiency using genetic programming.
Journal of Materials Processing Technology, 109(1-2):20-29, 2001.
details
-
Miran Brezocnik and Joze Balic and Leo Gusel.
Artificial intelligence approach to determination of flow curve.
Journal for technology of plasticity, 25(1-2):1-7, 2000.
details
Genetic Programming Books by Miran Brezocnik
-
Miran Brezocnik.
Uporaba genetskega programiranja v inteligentnih proizvodnih sistemih. University of Maribor, Faculty of mechanical engineering, Maribor, Slovenia, 2000.
In Slovenian.
details
Genetic Programming PhD doctoral thesis Miran Brezocnik
-
Miran Brezocnik.
MODELING OF TECHNOLOGICAL SYSTEMS BY THE USE OF GENETIC METHODS. Phdthesis ,
University of Maribor, Faculty of Mechanical Engineering, Smetanova ulica 17, SI-2000 Maribor, Slovenia, 1998.
details
Genetic Programming conference papers by Miran Brezocnik
-
Miran Brezocnik and Bostjan Vaupotic and Janez Fridrih and Ivo Pahole.
Cost estimation for punch dies by genetic programming. In
Milan Jurkovic and Vlatko Dolecek editors,
RIM 2005 / 5th International scientific conference on Production engineering, pages 167-172, 2005. Faculty of Technical Engineering, Bihac, Bosnia and Hercegovina.
details
-
Miha Kovacic and Miran Brezocnik and Joze Balic.
Genetic Programming Approach for Autonomous Vehicles. In
Mechatronics 2004 9th Mechatronics Forum International Conference, METU, Ankara, Turkey, 2004.
details
-
Miha Kovacic and Miran Brezocnik.
Evolution and transport systems. In
Computers in technical systems. Intelligent systems : proceedings of the joint conferences CTS+CIS, pages 41-44, Opatija, Croatia, 2004.
details
-
Miha Kovacic and Joze Balic and Miran Brezocnik.
Evolutionary approach to manufacturing control. In
Lihui Wang and Jeff Xi and William G. Sullivan and Munir Ahmad editors,
Proceedings of the 14th International conference on flexible automation \& intelligent manufacturing, pages 915-921, Toronto, Canada, 2004. NRC Research Press.
details
-
Miran Brezocnik and Mirko Ficko and Miha Kovacic.
Genetic based approach to predict surface roughness. In
8th International Research/Expert Conference Trends in the Development Machinery and Associated Technology, pages 91-94, Neum, Bosnia and Herzegovina, 2004.
details
-
Miha Kovacic and Miran Brezocnik.
Genetic programming planner for mobile robots. In
Proceedings A of the 6th International Multi-Conference Information Society, "Jozef Stefan" Institute, Jamova 39, Ljubljana, Slovenija, 2003.
details
-
Miha Kovacic and Miran Brezocnik and Joze Balic.
Genetic programming approach for surface quality prediction of monel alloy. In
Karl Kuzman editor,
4th International Conference on Industrial Tools, ICIT 2003, pages 385-388, Bled, 2003.
details
-
Miha Kovacic and Miran Brezocnik.
Evolutionary computation approach for autonomous vehicles. In
Branko Katalinic and Dzemo Tufkecic and Ramiz Selo editors,
Proceedings of the 2nd DAAAM International conference on Advanced technologies for developing countries, pages 339-344, Tuzla, Bosnia and Herzegovina, 2003. DAAAM.
details
-
Miha Kovacic and Miran Brezocnik.
Genetic programming approach for cutting forces prediction in milling. In
Branko Katalinic editor,
Annals of DAAAM for 2003 and proceedings of the 14th International DAAAM symposium "Intelligent manufacturing and Automation: focus on reconstruction and development, volume 2, pages 234-235, Vienna, 2003. DAAAM International.
details
-
Miran Brezocnik and Miha Kovacic and Mirko Ficko.
Genetic-based approach to predict surface roughness in end milling. In
7th International Research/Expert Conference "Trends in the Development Machinery and Associated Technology", pages 529-532, Barcelona, Spain, 2003.
details
-
Miha Kovacic and Miran Brezocnik.
Genetic programming approach for surface quality prediction. In
Branko Katalinic editor,
Annals of DAAAM for 2002 and Proceedings of the 13th International DAAAM Symposium "Intelligent Manufacturing and Automation: Learning from nature, volume 1, pages 285-286, Slavonski Brod, Croatia, 2002. DAAAM International.
details
-
Miran Brezocnik and Miha Kovacic.
Integrated evolutionary computation environment for optimizing and modeling of manufacturing processes. In
Safet Brdarevia and Sabahudin Ekinovia and Ramon Compamys Pascual and Joan Calvet Vivancos editors,
6th International Research/Expert Conference "Trends in the development of Machinery and Associated Technology", pages TMT02-073, Neum, Bosnia and Herzegovina, 2002.
details
-
Miran Brezocnik and Miha Kovacic.
Prediction of surface roughness with genetic programming. In
Leszek A. Dobrzanski editor,
Proceedings of the 11th International Scientific Conference Achievements in Mechanical and Materials Engineering, AMME'2002, pages 23-26, 2002.
details
-
Miha Kovacic and Miran Brezocnik.
Evolutionary transport system. In
Branko Katalinic editor,
Annals of DAAAM for 2001 and Proceedings of the 12th International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Precision Engineering, pages 253-254, Jena, Germany, 2001. DAAAM Publishing.
details
-
Miran Brezocnik and Miha Kovacic.
Survey of the evolutionary computation and its application in manufacturing systems. In
Milan Jurkovic and Isak Karabegovic editors,
3rd International Conference on Revitalization and Modernization of Production RIM 2001, pages 501-508, University of Bihac, Bihacu, Bosnia and Herzegovina, 2001.
details
-
Miran Brezocnik and Joze Balic.
A genetic programming approach for modelling of self-organizing assembly systems. In
Peter Kopacek and Dragica Noe editors,
Intelligent assembly and disassembly - IAD'98: A proceedings volume from the IFAC Workshop, pages 47-52, Bled, Slovenia, 1998. Pergamon.
details
-
Miran Brezocnik and Joze Balic.
Comparison of genetic programming with genetic algorithm. In
Anton Jezernik and Bojan Dolsak editors,
3rd International Conference Design to Manufacture in Modern Industry: Design to manufacture in modern industry, pages 150-156, 1997. University of Maribor, Faculty of Mechanical Engineering.
details
-
Miran Brezocnik and Joze Balic.
System for discovering and optimizung mathematical models using genetic programming and genetic algorithms. In
Branko Katalinic editor,
Proceedings of the 8th International DAAAM Symposium, pages 37-38, Dubrovnik, Croatia, 1997. DAAAM International.
details
Genetic Programming book chapters by Miran Brezocnik
-
Polona Dobnik Dubrovski and Miran Brezocnik.
The Usage of Genetic Methods for Prediction of Fabric Porosity. In
Sebastian Ventura editor,
Genetic Programming - New Approaches and Successful Applications, chapter 8, pages 171-198. InTech, 2012.
details
-
Miha Kovacic and Miran Brezocnik.
Programming of CNC lathe with GA. In
Martin Klanjsek editor,
publish or perish!, pages 265-274. Drustvo mladih raziskovalcev Slovenije, Ljubljana, Slovenia, 2004.
CD-ROM.
details
-
Miha Kovacic and Miran Brezocnik and Joze Balic.
Evolutionary cutting forces prediction. In
B. Katalinic editor,
DAAAM International Scientific Book 2004, volume 3, pages 313-322. DAAAM International Vienna, Vienna, 2004.
details
-
Miha Kovacic and Miran Brezocnik.
Evolutionary method for surface quality prediction. In
B. Katalinic editor,
DAAAM International Scientific Book 2003, volume 2, pages 331-338. DAAAM International Vienna, Vienna, 2003.
details
-
Miran Brezocnik and Miha Kovacic.
Modelling of intelligent mobility for next-generation manufacturing systems. In
B. Katalinic editor,
DAAAM International Scientific Book 2003, volume 2, pages 95-102. DAAAM International Vienna, Vienna, 2003.
details
-
Miha Kovacic and Miran Brezocnik.
Model of evolutionary transport system. In
B. Katalinic editor,
DAAAM International Scientific Book 2002, volume 1, pages 323-328. DAAAM International Vienna, Vienna, 2002.
details
-
Miran Brezocnik.
On intelligent learning systems for next-generation manufacturing. In
Branko Katalinic editor,
DAAAM International Scientific Book 2002, volume 1, chapter 6, pages 39-48. DAAAM International, Vienna, 2002.
details
Genetic Programming other entries for Miran Brezocnik